Modernization of looms
JSC "Textilmach"
offers services of modernization and repair looms type STB in order
to:
1. Increase productivity
of loom STB of the first generation manufactured before 1982. Overhaul
of them is effected with replacement of worn-out parts for parts and
units of looms of the second generation developed taking into consideration
the experience of operation and the remarks of the buyers;
2. Increase productivity
by 20-30% of looms STB of the second generation, produced after
1982. This is achieved by replacement of the picking angle 140o (STB-180,
220) and the picking angle 105° (STB-250, 330) for the picking
angle 120°; by installation of heald frames with broad heddle
guide and plate heddles;
3. Improve the quality
of produced fabrics by means of equipping looms with weft accumulators,
weft controllers, by means of installing an electromechanical warp
let-off and tension system to eliminate start strips and full operation
of beams;
4. Expansion of assortment
possibilities of looms STB due to:
- installation of additional selvage formers;
- changing one-color looms into two- and four-color
ones;
- installation of a dobby with electronic control
for 20 sections (18 healds) with optimization of heald motion;
- equipping with a four-color weft color change motion
driven from the dobby with maximum repeat of weft change up to 500
wefts either a jacquard ma-chine with repeat equal to the weave
repeat of the jacquard machine or an individual programmer with
maximum repeat up to 1500 wefts;
5. Increase density of produced
fabrics by means of equipping looms with slay mechanism with oft
beating, intermittent cloth let-off, backrest system of the original
construction.
Performance of this work is effected
with a high quality, in optimal time limits and at reasonable prices
thanks to much experience of production, adjustment, and modernization
of looms series STB and also thanks to availability of spare parts
and units of own manufacture.
Back
|
